MATERIALS High-performance Film
Separator│
Realizing high degree of precision in coating thin film under clean environment
Variety of products (variety of kinds)・capable of accepting small number of order and also may customize according to the client's demand
| classification | grade of mold release | coating resin | delamination load（mN/50mm width) | Measuring tape | Feature | ||||
| Ultra light release force | Q2-ASI5 | Silicon type | 20 | Nitto 31B | Electrification prevention・characterisitc of exposure to atmosphere resistance・improvement in adhesion | ||||
| FU(50) | Silicon type | 20 | 〃 | ||||||
| Light | SR(S) | Silicon type | 40 | 〃 | condensation type | ||||
| A3 | Silicon type | 40 | 〃 | general type | |||||
| C | Silicon type | 60 | 〃 | general type | |||||
| E | Silicon type | 70 | 〃 | general type | |||||
| Vseries medium~heavy release force | V0 | Silicon type | 140 | 〃 | general type | ||||
| V2 | 190 | 〃 | |||||||
| V4 | 270 | 〃 | |||||||
| V6 | 380 | 〃 | |||||||
| V8 | 520 | 〃 | |||||||
| K-ASI5 series Light~heavy release force | K0-ASI5 | Silicon type | 60 | 〃 | Electrification prevention・characterisitc of exposure to atmosphere resistance・improvement in adhesion | ||||
| K2-ASI5 | 130 | 〃 | |||||||
| K4-ASI5 | 200 | 〃 | |||||||
| K6-ASI5 | 280 | 〃 | |||||||
| K8-ASI5 | 370 | 〃 | |||||||
| J series Light~heavy release force | J0L | Silicon type | 30 | 〃 | characterisitc of exposure to atmosphere resistance | ||||
| J0 | 50 | 〃 | |||||||
| J2 | 120 | 〃 | |||||||
| J4 | 220 | 〃 | |||||||
| J6 | 320 | 〃 | |||||||
| J8 | 430 | 〃 | |||||||
| Ultra heavy release forcee | X20 | Silicon type | 600 | 〃 | heavy release force | ||||
| X08 | Silicon type | 800 | 〃 | heavy release force | |||||
| Others | P | Silicon type | 100 | 〃 | Giving the characteristic of printing (paintable) | ||||
| HSP-ASI5 | Silicon type | 60 | 〃 | Electrification prevention・Stablization of high speed separation・ Stablization of aging separation | |||||
| Ultra heavy release force | TF535 | Non-silicon type | 2500 | 〃 | Non-silicone | ||||
| TF235 | Non-silicon type | 5500 | 〃 | Non-silicone | |||||
| Flourine type | SS1A | Flourine type | 70 | Nippa No.100 | For silicone adhesive | ||||
| SS1B | Flourine type | 110 | 〃 | ||||||
| SS1C | Flourine type | 140 | 〃 | ||||||
| SS4A | Flourine type | 80 | 〃 | ||||||
| SS4B | Flourine type | 140 | 〃 | ||||||
| SS4C | Flourine type | 340 | 〃 | ||||||
| FSA6 | Flourine type | 70 | 〃 | ||||||
| FSB6 | Flourine type | 50 | 〃 | ||||||
| FSC6 | Flourine type | 50 | 〃 | ||||||
★ The table shows measured data and can not be deemed as guaranteed value.
method of measurement
180° degrees 300㎜/min peel（ measure after placing it indoor）
Base film (PET)thickness
25μ・38μ・50μ・75μ・100μ・125μ・188μ・250μ
Other base film
White PET・Matt PET・Sand Matt PET・Hair Line PET・Color Dry Lamination PET and etc.